• Ball bearing units

    This bearing unit is a combination of a radial ball bearing, seal, and a housing of high-grade cast iron or pressed steel, which comes in various shapes. The outer surface of the bearing and the internal surface o […]

  • Universal joint bearings

    The manufactures these bearings with a cold forged or machined cup needle roller bearings with a closed end for different applications. They are not only used in the automotive industry for joints of commercial ve […]

  • Clutch release bearings

    The clutch release bearings represent the first truly clutch-compatible bearing with its patented variable contact raceway geometry. This exclusive variable contact design permits maximum speeds at maximum loads, resists […]

  • Spherical roller bearings

    These bearings have barrel-shaped rollers between the inner ring, which has two raceways, and the outer ring which has one spherical raceway. Spherical roller bearings can take, not only heavy radial loads, but al […]

  • Cylindrical roller bearings

    In bearings of this type, the cylindrical rollers are in linear contact with the raceways. They have a high radial load capacity and are suitable for high speeds.

  • Tapered roller bearings

    Bearings of this type use conical rollers guided by a back-face rib on the cone. These bearings are capable of taking high radial loads and also axial loads in one direction. In the customer required, the rollers are inc […]

  • Deep groove ball bearings

    Higher performance and compact design are required due to increased engine power. – For higher fuel efficiency and lower fuel consumption – For increasing vehicle speeds – Better and endurance life in c […]

위로이동